05-15-2025, 04:05:09
Portable balancer & Vibration analyzer Balanset-1A
Description:
![[Image: %D0%91%D0%B0%D0%BB%D0%BA%D0%BE%D0%BC%D0%...877834.jpg]](https://vibromera.eu/wp-content/uploads/2021/11/%D0%91%D0%B0%D0%BB%D0%BA%D0%BE%D0%BC%D0%9A%D0%B8%D1%82-scaled-e1732998877834.jpg)
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Details of the Balanset-1A
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Essential Features and Capabilities
Vibrometer Function
Tachometer: Precise RPM measurement.
Phase: Accurately determines the phase angle of vibration signals for precise analysis.
1x Vibration: Measurement and analysis of the primary frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Keeps track of overall vibration levels.
Measurement Log: Saves data for later analysis.
Balance Mode
Single-Plane Balancing: Balances rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Provides a detailed view of the frequency spectrum for analysis.
Extra Capabilities
Archive: Save and access past balancing sessions.
Reports: Generate detailed balancing reports.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Perfect for mass production rotor balancing.
What’s in the Package
The Balanset-1A comes with:
A measurement module with interface.
Two vibration transducers.
Optical sensor (laser tachometer) with a magnetic holder.
Digital weighing scales.
Software (laptop sold separately).
Hard plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Details of the Balanset-1A
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Essential Features and Capabilities
Vibrometer Function
Tachometer: Precise RPM measurement.
Phase: Accurately determines the phase angle of vibration signals for precise analysis.
1x Vibration: Measurement and analysis of the primary frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Keeps track of overall vibration levels.
Measurement Log: Saves data for later analysis.
Balance Mode
Single-Plane Balancing: Balances rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Provides a detailed view of the frequency spectrum for analysis.
Extra Capabilities
Archive: Save and access past balancing sessions.
Reports: Generate detailed balancing reports.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Perfect for mass production rotor balancing.
What’s in the Package
The Balanset-1A comes with:
A measurement module with interface.
Two vibration transducers.
Optical sensor (laser tachometer) with a magnetic holder.
Digital weighing scales.
Software (laptop sold separately).
Hard plastic carrying case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100