04-01-2025, 05:04:33
Portable balancer & Vibration analyzer Balanset-1A
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Main Functions and Features
Vibrometer Function
Tachometer: Exact measurement of rotational speed (RPM).
Phase: Determines the phase angle of the vibration signal for precise analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Comprehensive analysis of the vibration frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Stores data for subsequent analysis.
Balance Function
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Employs three counterweights for imbalance correction.
Charts and Graphs
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Retain and retrieve previous balancing sessions.
Reports: Create thorough reports on balancing.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Designed for balancing rotors in serial manufacturing.
Package Contents
The package contains:
A measurement block with an interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (laptop can be ordered separately).
Hard plastic carrying case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description:
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Main Functions and Features
Vibrometer Function
Tachometer: Exact measurement of rotational speed (RPM).
Phase: Determines the phase angle of the vibration signal for precise analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Comprehensive analysis of the vibration frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Stores data for subsequent analysis.
Balance Function
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Employs three counterweights for imbalance correction.
Charts and Graphs
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Retain and retrieve previous balancing sessions.
Reports: Create thorough reports on balancing.
Rebalancing: Simplifies rebalancing using stored data.
Serial Production Balancing: Designed for balancing rotors in serial manufacturing.
Package Contents
The package contains:
A measurement block with an interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (laptop can be ordered separately).
Hard plastic carrying case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!